ProMix PD2K Proportioners
Images are representations only.

ProMix PD2K Proportioners

Brand: Graco, Inc
Request Information
Favorite

ProMix PD2K Proportioners
The ProMix PD2K mixes the material close to the gun so the flush zone is significantly smaller.

This allows customers to use less paint, spend less on disposal costs and allows for faster color changes.

And because there is limited mixed material in the system, the ProMix PD2K is ideal for short pot life materials. It is also compatible with acid-based materials.

Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops.

The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts.
Features
  • Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems.
  • Limited mixed material in the system - great for short pot life materials.
  • Faster color changes and less material to flush mean less waste and less downtime.
  • Stalls under pressure for consistent, on-ratio results (within 1% accuracy).
  • Proportion both epoxy and urethane with ONE system.
  • Manage up to 30 colors and 4 catalysts with 2 or 4 dosing pumps.
  • Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps.

Specifications

Brand

Air Filter Inlet Size

  • 3/8” NPT Female

Air Filtration for Air Logic (User-Supplied)

  • 5 micron (Min.) Filtration Required, Clean & Dry Air

Air Filtration for Atomizing Air (User-Supplied)

  • 30 micron (Min.) Filtration Required, Clean & Dry Air

Air Spray Systems

  • 2.1 MPa, 21 bar

Air Supply

  • 0.6 - 0.7 MPa, 6.0 - 7.0 bar

Air-Assisted Spray Systems

  • 10.5 MPa, 105 bar

External Power Supply Requirements

  • 90-250 Vac, 50/60 Hz, 7 Amps Max.

Fluid Filtration (User-Supplied)

  • 100 Mesh Min.

Fluid Outlet Size

  • 1/4” NPT Male

Fluids Handled

  • One or Two Component Solvent & Waterborne Paints, Polyurethanes, Epoxies, Acid Catalyzed Varnishes, Moisture Sensitive Isocyanates

Maximum Fluid Flow

  • 800 cc/minute (Depending on Material Viscosity)

Maximum Working Air Pressure

  • 0.7 MPa, 7.0 bar

MC0500

  • Pumps sold separately, see selected pump manual for wetted parts information.

MC1000 & MC2000

  • 17-4 PH, 303, 304 Stainless Steel, Tungsten Carbide (with Nickel Binder), Perfluoroelastomer, PTFE, PPS, UHMWPE

MC3000 & MC4000

  • 316 Stainless Steel, 17-4 PH Stainless Steel, PEEK, Perfluoroelastomer, PTFE, PPS, UHMWPE

Mixing Ratio Range

  • 0.1:1 - 50:1, ± 1 %

Operating Temperature Range

  • 2° to 50° C

Sound Data

  • Less than 75 dBA

Storage Temperature Range

  • -20° to 70° C

Systems with High-Pressure Pumps

  • 10.5 MPa, 105 bar

Systems with Low-Pressure Pumps

  • 2.1 MPa, 21 bar

Viscosity Range of Fluid

  • 20-5000 Centipoise

Weight (Approximate)

  • 88 kg

Wetted Parts

  • 17-4 PH, 303, 304 Stainless Steel, Tungsten Carbide (with Nickel Binder), Perfluoroelastomer, PTFE, PPS, UHMWPE

Documentation

Brochure

Document

Instructions

show more