XP50 and XP50-hf Plural-Component Sprayer
Images are representations only.

XP50 & XP50-hf Plural-Component Sprayer

Brand: Graco, Inc
Request Information
Favorite

Graco XP50 Plural-Component Sprayers are designed to pump, mix and atomize medium to high solid coatings with superior results. 

When you upgrade from hand mixing, you'll find that the XP provides excellent return on investment, by reducing material waste and by using less clean-up solvent. 

The XP-hf system combines the XP50 Sprayers with the powerful XL 10000 air motor. Combining these two technologies, you get more flow - getting jobs done faster and with less wear and tear. 

Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. 

That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.
Features
  • Reduced material waste
  • No more throwing away unused mixed material at the end of the day
  • Save money by using less clean-up solvent
  • Consistent material quality - no more guesswork or human error in measuring materials
  • Easy to operate - minimal training required
  • Reduced maintenance costs
  • Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths.

Specifications

Brand

Air Inlet Filtration

  • 40-micron Filter / Separator Included

Air Inlet Size

  • 3/4” NPSM Female

Bare XP-h System with No Heaters, Solvent Flush Pump, or Hoppers

  • 204 kg

Bare XP35, XP50, or XP70 System with No Heaters, Solvent Flush Pump, or Hoppers

  • 193 kg

Combined Fluid Output (cc/cycle)

  • See Models Section in Instruction Manual.

Fluid Flow at 40 cpm

  • See Models Section in Instruction Manual.

Fluid Gauge Manifold Outlets

  • 1/2” NPT Female

Fluid Mix Manifold Inlets

  • 1/2” NPT Female Ball Valves

Fluid Pump Inlets without Hoppers

  • 1-1/4” Male NPSM

Flush Pump Suction Tube

  • Aluminum

Full XP-h System with Heaters, Solvent Flush Pump, & Hoppers

  • 273 kg

Full XP35, XP50, or XP70 System with Heaters, Solvent Flush Pump, & Hoppers

  • 261 kg

Gravity Feed with 7 Gallon (26 Liter) Hoppers

  • 200 to 20,000 Cps (Pourable)

Hazardous Areas

  • EX II 2 G C IIA T2, NOTE: XP-h Pump Packages (284xxx) are Not Ex Rated.

Hoses

  • Nylon Core

Housings & Manifolds

  • Carbon Steel with Electroless Nickel Plating

Hydraulic Fluid Consumption (XP-h Models Only)

  • 0.76 Liters Per Cycle

Maximum Air / Hydraulic Oil Working Pressure

  • See Models Section in Instruction Manual.

Maximum Air Pressure Supply to the System

  • 12 bar, 1 MPa

Maximum Feed Pressure from Remote Source

  • 17 bar, 1.7 MPa

Maximum Fluid Temperature

  • 71°, C

Maximum Fluid Working Pressure

  • See Models Section in Instruction Manual.

Maximum Lifetime

  • Indefinite with Recommended Maintenance & Periodic Rebuilds for Critical Parts.

Maximum Storage Time

  • 5-Years (To Maintain Original Performance, Replace Soft Seals after 5-Years of Inactivity.)

Miscellaneous Parts

  • Plated Carbon Steel, Stainless Steels, Carbide, Acetal, UHM-WPE, Nylon, PTFE Solvent Resistant Plastics

Mix Manifold Material Outlet

  • 1/2” NPT Female

Operating

  • 4-54°, C

Power Efficiency Factor (XP70)

  • 2.12 M³, Compressed Air / 1 Liter Sprayed Material at 7 bar (0.7 MPa)

Pressure Feed

  • Any Viscosity that Will Not Require Feed Pressure more than 15 % of Outlet Pressure

Pressure Ratio

  • See Models Section in Instruction Manual.

Pump Packings

  • Carbon-Filled PTFE, Proprietary UHMWPE

Sound Power

  • 7 bar, 0.7 MPa

Sound Pressure

  • 7 bar, 0.7 MPa

Storage

  • -1-71°, C

XP Pump Outlets

  • 30 Mesh

XP-h Pump Only

  • 132 kg

XP35

  • 50 scfm at 100 psi/gpm (1.42 M, #xb3, / min at 7 bar, 0.7 MPa)

XP35, XP50, or XP70 Pump Only

  • 130 kg

XP50

  • 60 scfm at 100 psi/gpm

XP70

  • 75 scfm at 100 psi/gpm

XTR Spray Gun

  • 60 Mesh

Documentation

Data Sheets

Brochure

Document

Instructions

show more