XP-h Hydraulic Plural-Component Sprayer
Images are representations only.

XP-h Hydraulic Plural-Component Sprayer

Brand: Graco, Inc
Request Information
Favorite

XP-h Hydraulic Plural-Component Sprayer
XP-h Hydraulic Sprayer: Built with patented XP ratio technology, the Graco XP-h Hydraulic Plural-Component Sprayer is ideal for truck, palletized, trailer or flatbed systems that have on-board hydraulic power.

It is well-suited for OEM traffic marking applications. The system’s hydraulic motor has been optimized and rated to match the pressure capabilities of the NXT 6500 air motor used on Graco XP50 and XP70 sprayers.

The XP is now more versatile than ever for contractors wishing to take advantage of the convenience and efficiency of a gas-powered hydraulic system.

Hydraulic systems are energy efficient and provide very smooth changeovers on the XP resulting in well balanced pressures and the smoothest possible spray pattern.

Target applications include: Situations where a customer wants to tow only one trailer and eliminate the need for a large tow-behind compressor, Applications where a contractor already has small utility generators for the XP fluid heaters and small compressors capable of operating a solvent pump or transfer pumps with the XP. (Hydraulic solvent pumps are available separately from Graco, but would require a distributor to install onto the XP)
Features
  • Available in three pressure ranges: 3500, 5000 and 7250 psi (241, 345 and 500 bar).
  • Standard mix ratios for protective coating materials available: 1:1, 2:1, 2.5:1, 3:1, 4:1.
  • Available as a stand or wall-mount system.
  • Fits onto the standard XP portable cart.

Specifications

Brand

Air Inlet Filtration

  • 40-micron Filter / Separator Included

Air Inlet Size

  • 3/4” NPSM Female

Bare XP-h System with No Heaters, Solvent Flush Pump, or Hoppers

  • 204 kg

Bare XP35, XP50, or XP70 System with No Heaters, Solvent Flush Pump, or Hoppers

  • 193 kg

Combined Fluid Output (cc/cycle)

  • See Models Section in Instruction Manual.

Fluid Flow at 40 cpm

  • See Models Section in Instruction Manual.

Fluid Gauge Manifold Outlets

  • 1/2” NPT Female

Fluid Mix Manifold Inlets

  • 1/2” NPT Female Ball Valves

Fluid Pump Inlets without Hoppers

  • 1-1/4” Male NPSM

Flush Pump Suction Tube

  • Aluminum

Full XP-h System with Heaters, Solvent Flush Pump, & Hoppers

  • 273 kg

Full XP35, XP50, or XP70 System with Heaters, Solvent Flush Pump, & Hoppers

  • 261 kg

Gravity Feed with 7 Gallon (26 Liter) Hoppers

  • 200 to 20,000 Cps (Pourable)

Hazardous Areas

  • EX II 2 G C IIA T2, NOTE: XP-h Pump Packages (284xxx) are Not Ex Rated.

Hoses

  • Nylon Core

Housings & Manifolds

  • Carbon Steel with Electroless Nickel Plating

Hydraulic Fluid Consumption (XP-h Models Only)

  • 0.76 Liters Per Cycle

Maximum Air / Hydraulic Oil Working Pressure

  • See Models Section in Instruction Manual.

Maximum Air Pressure Supply to the System

  • 12 bar, 1 MPa

Maximum Feed Pressure from Remote Source

  • 17 bar, 1.7 MPa

Maximum Fluid Temperature

  • 71°, C

Maximum Fluid Working Pressure

  • See Models Section in Instruction Manual.

Maximum Lifetime

  • Indefinite with Recommended Maintenance & Periodic Rebuilds for Critical Parts.

Maximum Storage Time

  • 5-Years (To Maintain Original Performance, Replace Soft Seals after 5-Years of Inactivity.)

Miscellaneous Parts

  • Plated Carbon Steel, Stainless Steels, Carbide, Acetal, UHM-WPE, Nylon, PTFE Solvent Resistant Plastics

Mix Manifold Material Outlet

  • 1/2” NPT Female

Operating

  • 4-54°, C

Power Efficiency Factor (XP70)

  • 2.12 M³, Compressed Air / 1 Liter Sprayed Material at 7 bar (0.7 MPa)

Pressure Feed

  • Any Viscosity that Will Not Require Feed Pressure more than 15 % of Outlet Pressure

Pressure Ratio

  • See Models Section in Instruction Manual.

Pump Packings

  • Carbon-Filled PTFE, Proprietary UHMWPE

Sound Power

  • 7 bar, 0.7 MPa

Sound Pressure

  • 7 bar, 0.7 MPa

Storage

  • -1-71°, C

XP Pump Outlets

  • 30 Mesh

XP-h Pump Only

  • 132 kg

XP35

  • 50 scfm at 100 psi/gpm (1.42 M, #xb3, / min at 7 bar, 0.7 MPa)

XP35, XP50, or XP70 Pump Only

  • 130 kg

XP50

  • 60 scfm at 100 psi/gpm

XP70

  • 75 scfm at 100 psi/gpm

XTR Spray Gun

  • 60 Mesh

Documentation

Document

Instructions

show more