Hydraulic Dyna-Star Lubrication Pumps
Images are representations only.

Hydraulic Dyna-Star Lubrication Pumps

Brand: Graco, Inc
Request Information

Hydraulic Dyna-Star Lubrication Pumps Hydraulic Dyna-Star Lubrication Pumps Hydraulic Dyna-Star Lubrication Pumps
Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, preventing expensive component failures.
Features
  • A wide variety of 60 lb (27 kg), 120 lb (54 kg) and 400 lb (181 kg) pump lengths and 60 lb (27 kg) and 90 lb (41 kg) reservoir options to fit all your off-road equipment.
  • Pre-configured pump kits for injector or divider valve based systems give you maximum flexibility.
  • Optional Graco controller, level indicator, pressure switch, follower plates and drum covers put you in control of your system-no more second guessing.
  • Convenient pressure and flow control built-in.
  • Hydraulic control module-all your controls in one package for easy system setup and maintenance.

    • Specifications

    Brand

    10:1 Dyna-Star Pump Module - Electrical Power Requirements

    • 14.7 Watts

    10:1 Dyna-Star Pump Module - Electrical Requirements

    • Timed 24 Vdc Signal

    10:1 Dyna-Star Pump Module - Filtration (Hydraulic Fluid)

    • 10 μ (microns) or Better

    10:1 Dyna-Star Pump Module - Grease Capacity

    • Model 247444, 247707: 41 kg, Model 247574, 247706: 27 kg

    10:1 Dyna-Star Pump Module - Hydraulic Flow Rate Operating Range

    • 1.9 to 11.4 Lpm

    10:1 Dyna-Star Pump Module - Hydraulic Inlet Port Size

    • 3/8" Nps Swivel

    10:1 Dyna-Star Pump Module - Hydraulic Tank Line Size

    • 3/4" Nps Swivel

    10:1 Dyna-Star Pump Module - Lubricant Outlet Port Size

    • 1/2" NPS Swivel

    10:1 Dyna-Star Pump Module - Lubricant Outlet Pressure Range

    • Models: 247444, 247574, 247456, 247457, 247970: 17.0 to 24.0 MPa, 170 to 240 bar, Models: 247706, 247707: 17.0 to 31.0 MPa, 170 to 310 bar

    10:1 Dyna-Star Pump Module - Maximum Delivery at 60 cpm

    • 570 cm³/min

    10:1 Dyna-Star Pump Module - Maximum Hydraulic Fluid Temperature

    • 93.33° C

    10:1 Dyna-Star Pump Module - Maximum Hydraulic Input Pressure

    • 240 bar, 24.0 MPa

    10:1 Dyna-Star Pump Module - Mounting Holes for Pump Module

    • Six, 7/16" Holes on 13 7/8" Bolt Circle

    10:1 Dyna-Star Pump Module - Pump Module Height

    • Model 247444, 247707: 1086 mm, Model 247574, 247706: 893 mm

    10:1 Dyna-Star Pump Module - Pump Wetted Parts

    • See Manual 312350

    10:1 Dyna-Star Pump Module - Regulated Hydraulic Pressure Operating Range

    • Models: 247444, 247574, 247456, 247457, 247970: 1.7 to 2.4 MPa, 17.0 to 24.1 bar, Models: 247706, 247707: 1.7 to 3.1 MPa, 17.0 to 31.0 bar

    10:1 Dyna-Star Pump Module - Reservoir Diameter

    • 324 mm

    10:1 Dyna-Star Pump Module - Reservoir Fill Port Size

    • 1/2" NPT

    10:1 Dyna-Star Pump Module - Reservoir Overflow Port Size

    • 1/2" NPT

    10:1 Dyna-Star Pump Module - Reservoir Wetted Parts

    • Steel, Buna-N Rubber

    10:1 Dyna-Star Pump Module - Sound Pressure (Reading Taken with Pump Operating at 66 Cycles Per Minute. Sound Pressure Measured Per CAGI-PNEUROP, 1971)

    • 77 dB(A)

    10:1 Dyna-Star Pump Module - Vent Valve Wetted Parts

    • See Manual 309099

    5:1 Dynastar Pump Module - Electrical Power Requirements

    • 14.7 Watts

    5:1 Dynastar Pump Module - Electrical Requirements

    • Timed 24 Vdc Signal

    5:1 Dynastar Pump Module - Filtration (Hydraulic Fluid)

    • 10 μ (microns) or Better

    5:1 Dynastar Pump Module - Grease Capacity

    • 90 lb

    5:1 Dynastar Pump Module - Hydraulic Flow Rate Operating Range

    • 1.9 to 11.4 Lpm

    5:1 Dynastar Pump Module - Hydraulic Inlet Port Size

    • 3/8" Nps Swivel

    5:1 Dynastar Pump Module - Hydraulic Pressure Operating Range

    • 55 to 83 bar, 5.5 to 8 MPa

    5:1 Dynastar Pump Module - Hydraulic Tank Line Size

    • 3/4" Nps Swivel

    5:1 Dynastar Pump Module - Lubricant Outlet Port Size

    • 1/2 Nps Swivel

    5:1 Dynastar Pump Module - Lubricant Outlet Pressure Range

    • 172 to 241 bar, 17 to 24 MPa

    5:1 Dynastar Pump Module - Maximum Delivery

    • 119 in³/min, 1952 cm³/min at 3 gpm Hydraulic Flow Rate

    5:1 Dynastar Pump Module - Maximum Hydraulic Input Pressure

    • 241 bar, 24 MPa

    5:1 Dynastar Pump Module - Mounting Holes for Pump Module

    • Six 7/16" Holes on 13 7/8" Bolt Circle

    5:1 Dynastar Pump Module - Pump Module Height

    • 959 mm

    5:1 Dynastar Pump Module - Pump Wetted Parts

    • See Manual 308156

    5:1 Dynastar Pump Module - Reservoir Diameter

    • 324 mm

    5:1 Dynastar Pump Module - Reservoir Fill Port Size

    • 1/2" NPT

    5:1 Dynastar Pump Module - Reservoir Overflow Port Size

    • 1/2" NPT

    5:1 Dynastar Pump Module - Reservoir Wetted Parts

    • Steel, Buna-N Rubber

    5:1 Dynastar Pump Module - Sound Pressure (Reading Taken with Pump Operating at 66 Cycles Per Minute. Measured Per CAGI-PNEUROP, 1971)

    • 77 dB (A)

    5:1 Dynastar Pump Module - Vent Valve Wetted Parts

    • See Manual 309099

    Documentation

    Brochure

    Document

    Instructions

    show more