Images are representations only.
Dispensit 1092 & 1093 Precision Dispense Valve
Brand: Graco, Inc
The Dispensit Model 1092 & 1093 rod positive displacement valves with luer lock needles.
High precision repeatable shot-to-shot (1092) and bead (1093) volumetric dispensing. For tube dispense or pinch tube dispense.
Features- Pnuematic drive with micrometer stroke adjustment (Model 1092). Servo motor drive (Model 1093).
- Insensitive to changes in material viscosity-very thin to paste consistency.
- Easily integrated with automated equipment.
- Compatible with a wide variety of materials
- For low to high viscosity materials with various wetted component configurations for abrasive filled, or corrosive materials
- 1092 is a pneumatically-controlled valve with micrometer adjustable dispense volumes for accurate, repeatable shot dispensing
- 1093 is a servo-driven valve for programmable, precise shot or bead dispensing
- Pneumatic and electronic controls can be integrated for automated applications
Specifications
Brand
1092-10A-2
- 2.72-3.18 kg
1092-10A-4
- 4.54-4.99 kg
1092-10A-6
- 6.35-6.80 kg
Dimensions (H x L x W), Height to End of Material Inlet
- 395 mm
Height 092-10A-6: 20.28 Inch
- 515 mm
Height 1092-10A-4: 17.16 Inch
- 436 mm
Largest: 60 x 28 x 19 Inch
- 1524 x 711 x 483 mm
Length, Detection: 9.13 Inch
- 232 mm
Length, Non Cycle Detection: 8.38 Inch
- 395 mm
Maximum Air Working Pressure
- 0.7 MPa, 7 bar
Maximum Ambient Temperature
- 43° C
Maximum Cycle Rate (Application Dependent, Heat Required) .
- Up to 60 Cycles Per Minute
Maximum Material Inlet Pressure
- 8 MPa, 83 bar
Maximum Operating Temperature
- 65° C
Maximum Outlet Fluid Working Pressure
- 14 MPa, 138 bar
Minimum Air Working Pressure
- 480 kPa, 4.8 bar
Plastic Sleeves: 400 psi
- 2.8 MPa, 28 bar
Shot Size Range (Depending on Metering Rods Selected)
- 0.024 cc to 9.600 cc
Single Needle Outlet (Standard): 1.75 Inch
- 45 mm
Smallest: 22.5 x 10 x 4 Inch
- 572 x 254 x 102 mm
Supplied Air Requirements.
- 1 to 3 cfm at 80 psi to 100 psi
Wetted Parts
- Metering Valve: Hardened Steel, 303/304, 404, UHMWPE, Tungsten, Carbide, Fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses & Fittings: Mild Steel, 303/304, PTFE, Buna, Polyethylene, Polypropylene. Graco-supplied Tanks: Polyethylene,
