Jamesbury Figure 1056 Gas Shut-Off & Vent Valve

Brand: Valmet

The JAMESBURY Figure 1056 Automatic Safety Gas Valves are CSA approved for providing protection against fire and explosive hazards during light-off and operation of gas-burning equipment. 

When the electrical signal is interrupted or when there is a loss of air pressure, these gas-line valves operate rapidly to isolate or allow gas flow. This action may be initiated either by safety trip or normal shutdown sequencing. 

The units consist of a valve with EMISSION-PAK, actuator, limit switch, and solenoid pilot valve, and are approved as an assembly. 

Valves are available in ANSI Class 150 flanged design in 3" to 8" (80 to 200 mm) standard-port sizes. 

Valves are offered with either carbon steel or 316 stainless steel bodies. 

Trim is 316 stainless steel.

Specifications

Brand

Actuator Type

  • Spring Diaphragm

Approvals & Certifications

  • CSA - Class I, Groups C, D, & 9 Class II Groups E, F, G Div. 1 & 2

Ball Material

  • 316 Stainless Steel

Electrical Contacts

  • Normally Closed
  • Normally Open

Electrical Rating

  • Switch (SPDT, DPDT): 10 A at 125 Vac
  • Switch (SPDT, DPDT): 10 A at 250 Vac

Enclosure, Body Material

  • 316 Stainless Steel - A351 CF8M
  • Actuator: Ferrous
  • Carbon Steel (A216 WCB)

Environmental Protection

  • IP66
  • IP67
  • NEMA 4
  • NEMA 4X
  • NEMA 6
  • NEMA 7

Flange Size - 3” (DN 80)

  • 3” (DN 80) - 150# ASME /ANSI

Flange Size - 4” (DN 100)

  • 4” (DN 100) - 150# ASME /ANSI

Flange Size - 6” (DN 150)

  • 6” (DN 150) - 150# ASME /ANSI

Flange Size - 8” (DN 200)

  • 8” (DN 200) - 150# ASME /ANSI

Flange Type

  • Raised Face (RF)

Flow Rate

  • Full Port: 1,160 to 9,300 Cv
  • Reduced Port: 350 to 1,860 Cv

Media

  • Water

Operating Pressure

  • psi: 200 (kPa: 1,400, bar: 14) - Max.

Operating Temperature

  • -40° to 52° C (-40° to 125° F)

Port

  • Full
  • Reduced

Pressure Drop

  • psi: 1 (kPa: 6.9, bar: 0.69)

Seat / Seal Material

  • Seal: PTFE Graphite
  • Seat: PTFE
  • Seat: XTREME

Stem Material

  • 316 Stainless Steel

Supply Pressure

  • Air - psi: 100 (kPa: 6,900, bar: 6.9) Min.

Switch Type

  • DPDT
  • SPDT

Trim Material

  • 316 Stainless Steel

Valve Type

  • Automated

Voltage

  • Solenoid: 120 Vac at 60 Hz
  • Solenoid: 24 Vdc

show more