Images are representations only.
Axiom AN Series Valve Position Monitor
Brand: Valmet
The Axiom AN uses non-contact position sensing with solid state electronics and contaminant-tolerant pneumatic control.
Coupled with its space-efficient design, corrosion resistance and networking/Wireless Link capability, the AN is convenient and cost-saving benefits in hazardous and general-purpose process applications.
Features- Universal Voltage Solenoid System: Operates from 24 Vdc – 250 Vac at extended temperate range and features manual override. Single or dual coil available
- Fully Sealed Module: Solid state, fully potted sensors provide protection against residual moisture, vibration, and corrosives
- High Flow Pneumatic Valve: 5-way, 2-position valve operates on standard plant air. Rebreather prevents ingestion of contaminated air into actuator
- High Visibility Indication: Mechanical and electronic indication confirms open and closed position. Intense LEDs display position status from a distance
Specifications
Brand
Accuracy
- Position Sensing Accuracy: within 1°
Actuator Type
- Double-Acting
- Single-Acting
Approvals & Certifications
- CE
- FCC
- FM Intrinsically Safe Class I, Div. 1, Grade A, B, C, D & Class I Zone 0 Group IIC
- FM Intrinsically Safe Class I, II, III Div. 1, Grade A, B, C, D, E, F, G & Class I Zone 0 Group IIC
- FM Non-Incendive Apparatus Class I, Div. 2, Grade A, B, C, D & Class I Zone 2 Group IIC
- IC
Cap Material
- Pneumatic Valve End-Caps & Fasteners: Stainless Steel
Communication
- AS-Interface
- Bluetooth
- DeviceNET Protocol
Conduit Connection
- 1/2” NPT
- M20
- Micro Connector
- Mini Connector
Configuration
- 2-Wire Solid State Sensor
- Auxiliary Analog Input
- Dual Pilot
- Single Pilot
Consumption
- Solenoid Coil 35 Power Consumption: 20 mA at 20-55 Vdc (0.5 W Typical at 24 Vdc)
- Solenoid Coil 35 Power Consumption: 20 mA at 40-250 Vac (1.1 W Typical)
- Solenoid Coil 45 Power Consumption: 0.5 W at 12 Vdc
- Solenoid Coil 45 Power Consumption: 1 W at 24 Vdc
- Solenoid Coil 92 & 97 Power Consumption: 0.5 W
Cover Material
- Aluminum
- Visual Indicator Cover: Polycarbonate
Current
- NAMUR Sensor Current Rating: Target Absent > 2.1 mA
- NAMUR Sensor Current Rating: Target Present < 1.0 mA
- Solenoid Coil 35 Inrush Current: 0.14 A at 24 Vdc
- Stainless Steel NO Sensor 35S Min. on Current: 2 mA
- Stainless Steel NO Sensor 35S, Max.
- VCT DeviceNet Quiescent Current: 35 mA at 24 Vdc (No Analog Input, No Outputs Energized)
- VCT DeviceNet, Max.
- VCT with Extended Addressing Quiescent Current: 35 mA
- VCT with Extended Addressing, Max.
Deadband
- 6° from Set Point - Rotational Distance from Original Set Point where Switch Will De-Energize
Display
- LEDs
Environmental Protection
- IP66
- IP67
- NEMA 4
- NEMA 4X
- NEMA 6
Filter
- Solenoid Coil 35, 45, 92 & 97 Filtration Requirements: 50 microns
Flow Rate
- 0.8 CV
- 1.25 Cv
Indication
- 3-Way
- Red/Green
Input
- VCT DeviceNet Input Voltage: 11-25 Vdc
- VCT with Extended Addressing Input Voltage: 26.5-31.6 Vdc (AS-I Voltage)
Input Impedance
- CVT DeviceNet Analog Input Impedance: 254 ohms
Materials of Construction
- Pneumatic Valve End-Caps, Fasteners & Spool: Nickel-Plated Aluminum
- Visual Indicator Drum: Nylon
O-Ring Material
- Nitrile
Operating Pressure
- psi: 45 to 120 (KPA: 310.3 to 827.4, bar: 3.1 to 8.3)
Operating Temperature
- -40° to 80° C (-40° to 176° F)
Output
- 24 Vdc
Override
- External Latching
- External Momentary
- Internal Momentary Standard
Port
- 1/4” NPT
- 3/8” NPT
Repeatability
- Position Sensing Repeatability: within 1°
Seat / Seal Material
- Nitrile
- Polysulfone
Switch Type
- NAMUR
- Stainless Steel
Voltage
- DeviceNet Input Voltage: 57 mA at 11 Vdc (No Analog Input, No Outputs Energized)
- NAMUR Sensors 45S Voltage Range: 5-25 Vdc
- Solenoid Coil 35 Operating Voltage: 20-55 Vdc
- Solenoid Coil 35 Operating Voltage: 40-250 Vac
- Solenoid Coil 45 Operating Voltage: 12-24 Vdc (Output of Barrier)
- Solenoid Coil 92 & 97 Operating Voltage: 24 Vdc
- Stainless Steel NO Sensor 35S Voltage Range: 20-250 Vac/Vdc
Voltage Drop
- Stainless Steel NO Sensor 35S Voltage Drop: 6.5 V at 10 mA
- Stainless Steel NO Sensor 35S Voltage Drop: 7.2 V at 100 mA
